Dispatch Center

You're going to need to give us more information than that.

Believe this may be the same issue as me, have 3 dispatch centres, one at my main area (20+ Fire stations) secondary area (5 fire stations) and my new area (2 stations). They're all assigned but in my new area I've just got a trench rescue call, which I can't cover with 2 stations. Screenshots attached.

Update: another 2 calls I can't do

I also get this problem

It's because you must not have the dispatch center enabled to only receive calls that are specific to that dispatch center. I am going to paste the update post from the Facebook page which you all can read and find the simple fix to your problem.

As you all are aware, you are now able to create multiple dispatch centers for every 25 buildings you have. Well, now you are capable of assigning which buildings are assigned to what dispatch center as well. Every mission that is generated for a building inside a dispatch center - (with activated feature) - will only generate missions that are possible for the user in that dispatch center area.
Once you create another dispatch center, you’ll need to goto the “buildings tab” and assign each building to its appropriate dispatch center. Once all buildings are assigned, you’ll need to scroll to the bottom and click “edit” on the bottom left corner. Once the edit screen is open, you can click “enable”. The missions only for that dispatch centers stations will generate.
If you have a dispatch center that has 5 fire stations assigned to it and another dispatch center assigned with 20 fire stations. The 5 station dispatch center will not receive the missions requiring 6 or more fire stations, etc.

EFD850,
thank you for your reply as i had the same issue.

thanks