Option to select units 1st/2nd/3rd out responding to calls

  • Who else has Engines, Rescue Engines, & Quints dispatch to a call when you wanted a different unit to go out first?


    Not talking about using the groups section, But instead selecting a unit to dispatch first then selecting other for second and third out etc.


    For instance this would be one of my stations to do this,


    Station 191:
    -Command 1900 - 1st out Command Unit
    -Rescue Engine 1911 = 1st out Rescue, 2nd out Engine
    -Engine 1912 = 1st out Engine
    -Rescue Engine 1913 = 2nd out Rescue, 2nd out Engine
    -Command Unit 1918 - 2nd out Command Unit


    Station 363:
    -Engine 3631 = 1st out Engine
    -Rescue Engine 3632 = 1st out Rescue, 3rd out Engine
    -Ladder 3635 = 1st out Ladder, 2nd Out Engine


    Station 184:
    - Command 1840 - 1st out Command Unit
    - Engine 1841 - 1st Engine
    - Engine 1842 - 2nd Engine
    - Tanker 1847 - 1st out Tanker
    - Utility 1848 - Only used to pull Marine Unit 184
    - Marine Unit 184 - 1st out Water Rescue
    - Ambulance 1881 - 1st out Ambulance
    - Ambulance 1882 - 2nd out Ambulance

  • If I've got two pumps I based at one station, I set the delay to 1 second on the second pump (by going into the specific vehicle settings). I dont believe there is any way to work this out with joint units but you can always experiment at what works best with your setup.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!